3.3.2- Symbols labeled on machine
Read the instructions manual before operating the machine
Read, understand and follow all warnings
Warning! Hot surface. Burning hazard.
Never touch hot surface
Wear head, eye and ear protection.
Wear protective shoes and gloves
.
Beware of foot injury by cutting element
.
Beware of projections and thrown objects hit by cutting element.
Never use product without blade shield properly mounted.
Keep all persons and animals at minimum 15m away from working
area and machine.
Caution! Exhaust gases contain dangerous carbon monoxide.
Operate the product only in outdoors or in well ventilated areas.
Never start the engine inside a closed room or building.
Protect the machine from rain. Do not expose the machine to rain or leave the
machine outside under the rain.
Do not use the product in bad weather, in the rain or during inclement weather,
strong winds, during cold or hot weather, or fog or other conditions that reduce
visibility. Working in bad weather leads to increase fatigue and risk of accidents,
etc.
Do NOT tolerate any open flames or sources of ignition near the location where
you store the gas, during the preparation of the mixture or when filling the tank,
and during use of the product.
Warning! Kickback.
An uncontrolled kickback of the blade may occur when using the brush cutter,
especially when the spinning blade meets or hits a hard or solid object in the
critical zone (i.e. the angle of the blade between 12 and 2 o’clock).
Risk of serious or fatal injury.
Before any intervention (ex. Cleaning, adjustment, servicing…) ALWAYS turn
off engine, allow engine to cool down, and make sure cutting element stopped
rotating.
Page
40
/
49
