Page
14
/
26
Spraying operations
•
Switch on the pump and adjust the working pressure appropriately.
•
Pull the trigger (17) on the handle (16) to start spraying. Lock the trigger by the trigger
locker for continuous spraying. Refer to Fig. 4a.
•
You can adjust the spray pattern by turning the spray nozzle (10). Refer to Fig. 4b.
•
Release both trigger (17) and trigger lock on the handle (16) to stop spraying.
•
Switch off the pump after operations.
•
Aimed to relief any remaining pressure in the system, pull the trigger for few more seconds.
•
In case of abnormal fume, sound or odor evolved from the sprayer, immediately remove the
product from you and maintain a safety distance in the downwind position.
Fig. 4a
Fig. 4b
WARNING!
Never use the product under windy or raining weathers.
ATTENTION!
Aimed to avoid dry running of the pump
,
you should switch off the pump when
the tank is running out of liquid.
Drain unused chemical
•
Remove the drainage cap (28), then drain and collect the unused chemical into a suitable
container.
•
Restore the cap after drainage.
•
Follow the local regulations for chemical disposal.
After use
•
Switch off the pump.
•
Remove the battery pack from the tool.
•
Clean the product exterior surface.
5.3- Tips
•
Always proceed with the greatest care when spraying.
•
Take appropriate meassures to prevent unintended application of chemical to other areas or
in the environment.
•
Check the wind direction before starting work, stay in the downwind position.
•
Select suitable sprayer wand and nozzle for your work.
•
Ensure sufficient and even application of the chemical.
