5.5- Pulling capacity
1. The winch has a capacity of 540 kg (
PRTRM1000
) or 1080 Kg (
PRTRM2000
). Applying this
measurement to practical applications, the winch can be used to pull the following:
(
R
) Rolling load
- a wheeled moving vehicle of up to 540 kg (
PRTRM1000
) or 1100Kg
(
PRTRM2000
)
(
M
) Marine load
- a water borne craft of up to 450 kg (
PRTRM1000
) or 1000Kg (
PRTRM2000
).
(
T
) Pulling load
(Traction)
- a load of up to 180kg (
PRTRM1000
) or 360Kg (
PRTRM2000
) from a dead stop on
level ground.
2. The pulling capacity reduces as the incline increases.
For example, the rolling capacity for model
PRTRM1000
is reduced from 540 kg on flat ground
to 90
kg on a 45° incline.
Please refer to the following chart for estimated pulling capacity (rolling weight) on various inclines.
Maximum rolling weight capacities on an incline, where: P = Weight and I = incline degree
PRTRM1000
PRTRM2000
VI. MAINTENANCE AND STORAGE
6.1- Winch maintenance
1. Follow the instructions for lubricating periodically
Lubricate the cable and hook regularly with slight grease.
Grease the gears every 6 months. Use any good quality waterproof grease.
2. Inspect periodically all parts, steel cable, accessories and replace them if damaged or used.
3. Have damaged parts replaced by an authorized service center.
4. Check the nuts periodically and tighten them if they are loose.
6.2- Storage
- Keep product, instructions manual and accessories in its original packaging.
- Product must be stored in a dry location. Always lock up product and keep out of reach of children
6.3- Disposal
- Do not dispose with household garbage. Do not throw into the environment.
- Dispose of the product in a collection centre or a waste drop-off centre; or seek advice from your
local municipality.
- Proceed with disposal of, the tool, accessories and packaging according to local regulations
regarding the protection of the environment