3d, 3e & 3f).
Note: Before and during use, periodically check the tightness of the shaft / propeller / mixer
assembly.
Fig. 3a
Fig.3b
Fig. 3c
Fig. 3d
Fig. 3e
Fig. 3f
4.2- Starting and Stopping (
Fig. 4)
Press and hold the trigger (2) to start the machine. Once the trigger (2) is in the "ON" position, press
the trigger lock button (3). This will lock the trigger (2) to the "ON" position without you having to
hold it. To stop the machine, push and release the trigger (2).
Fig. 4
4.3- Speed shift know I-II
The mixer is equipped with a speed switch (1) to adapt the speed to the product to be mixed (Fig. 5)
The first speed is the slow speed, the second the fast speed. To change from one gear to another, turn
the speed switch (1) 180 degrees.
CAUTION: Only change the switch with the engine off and the mixer disconnected from its
power source. If the switch is struggling to change position, turn the propeller slightly and
attempt to change the speed again.
Fig. 5
