Ribimex 210336 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 65

Ribimex 210336 Скачать руководство пользователя страница 29

The declared vibration total value may also be used in a preliminary assessment of exposure
Warning! The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to the trigger time).
Prolonged used of a tool (or other machines) may expose the operator to vibrations that may product white
finger disease (Raynaud’s syndrome) or carpal tunnel syndrome.
These conditions reduce the hand’s ability to feel and regulate temperature, produce numbness and may cause
nerve and circulation damage and tissue necrosis.
All factors that contribute to the white finger disease are not known.
Some of the factors mentioned in the development of the white finger disease are: cold weather, smoking and
diseases or physical conditions that affect blood vessels and blood transportation, as well as, high vibration
levels and long periods of exposure to vibration.
To help in the prevention and reducing the risk of the white finger disease, please note the following:
-- wear gloves and keep your hands warm;
-- maintain a firm grip at all times, but do not squeeze the handles with constant pressure,
-- take frequent pauses
The operator should closely monitor the condition of their hands and fingers, and if any of the symptoms
appear, seek medical advice immediately.

18. Warning
The use of any accessory or attachment, other than one recommended in this instructions’ manual may present
a risk of injury (to persons or animals) and may cause damages.
The user and/or operator are responsible for any damages or injury caused to properties and/or persons while
working with the chainsaw.
19. Remarks
The safety precautions and instructions given in this manual are unable to cover in detail all the conditions and
situations that may arise.
The operator and/or user must use common sense and caution when operating the product especially for any
matters that are not referred in the above.
20. WARNING
Do not assume of your knowledge of the chainsaw.
Remember that a split second of negligence is sufficient to cause serious injury and/or damage.

3.6- In the event of emergency

Stop immediately the chainsaw and unplug from mains.
Assist the injured person with first aid and call for medical assistance as quickly as possible.

IV. GETTING STARTED

4.1- Unpacking

Remove product from its packaging.
Check that product and accessories are not damage.

4.2- Content

The unit package contains:
- Power unit
- Guide bar
- Chain
- Protective sheath
- Manual

4.3- Assembly

«
...
27
28
29
30
31
...
»

Содержание 210336


































































Отзывы:

Нет отзывов