Battery installation
• Push button to release tray
• Install four “LR20” or “D” type batteries in battery
compartment.
• Insert batteries respecting the polarity
• Do not mix old and new batteries or batteries of
different types
• Use alkaline batteries for best performance (not
supplied)
FILLING SPRAYER
Always follow directions of spray material manufacturer. We recommend mixing solution in
another container and straining if any particles are not dissolved after mixing.
The spray mixture can be added by removing the threaded cap or unlatching the complete top part
of sprayer. Replace cap or top securely before spraying.
Adding Chemicals
• Use liquid chemicals only
• Mix concentrates in a separate container.
If any particles are not dissolved, strain spray
material before pouring into tank
WAND ADJUSTMENT
• Loosen caps to adjust wand length
• After adjustment, tighten caps before spraying
NOZZLE ADJUSTMENT
Cone spray for
broader coverage
Stream spray for
greater distance
SWITCHING ON AND OFF
ON/OFF switch controls spraying.
Press “ON” for Continuous spraying, and press “OFF” to stop spraying.
V. OPERATION
Intended use
- The product is intended for indoor domestic use.
Operation:
1. Always wear appropriate protective equipment.
2. Insert batteries into the battery compartment.
3. Insert spray liquid into the tank.
4. Switch ON to start.
5. Adjust nozzle to select preferred spray pattern.
6. Direct the spray towards working area.
7. Once work is finished, stop product.
Battery
Compartment
