RIB MASTER Wi-Fi ACG6094 Скачать руководство пользователя страница 10

Страница: 10 / 24

The Wi-Fi System complies with the standard EN13849-2:2008 and
together with a RIB electronic control panel is a Class 2 protection
device.
The Wi-Fi System through the use of the MASTER Wi-Fi card permits
the construction of a system with NOVA Wi-Fi photocells and TOUCH
Wi-Fi strips which also attach to the moveable panel without the
need for a cable collector.

The system constantly monitors the presence of the various safety
devices and the status of the batteries, completely meeting the need for
active safety for all types of openings.
Using the RIB electronic control panel it is possible for the system to
perform an auto test as required by current standards.
Each radio-controlled safety device has its own internal identification code
which distinguishes it from the others.

EFERENCE STANDARDS FOR AUTOMATIC DOORS AND

GATES

The installer must ensure that the Wi-Fi System is connected as specified
by the standard EN12453 as per 5.1.1.6 (points e and f) to an electronic
control  panel  capable  of performing an  operations  check  before  closing
(AUTO TEST).
Therefore, the use of RIB devices permits system installation in compliance
with current Standards and Directives.
Once  machine  installation  is  complete  it  must  be  ascertained  that  it
complies with standard EN13241-1.
RIB  may  not  be  held  responsible  for  any  damage  caused  by  improper,
wrong or unreasonable use of the product.

ASTER Wi-Fi

This is the heart of the system: it runs all of the control (433,92 MHz),
safety and signaling (868,3 MHz) devices programmed in the installation
phase.
MASTER Wi-Fi is available in 4 versions:

- MASTER Wi-Fi with connection couplings

(code ACG6094), for use

with all non-CRX RIB electronic control panels.

- MASTER Wi-Fi with terminal block

(code ACG6099), for use with other

brands or RIB CRX panels.

- MASTER Wi-Fi FR with terminal block

(code ACG6150), for use with

other brands or RIB CRX panels.

- MASTER Wi-Fi OS with terminal block

(code ACG6152), for use with

other brands or RIB CRX panels.

AFETY DEVICES

MASTER Wi-Fi can operate up to 6 safety devices (NOVA Wi-Fi +
V TOUCH Wi-Fi + TX RED) at the same time.

- NOVA Wi-Fi photocells

(code ACG8037): can be connected to a

TOUCH mechanical strip (code ACG3015) or a resistive strip on both
the photocell transmitter and the photocell receiver.

- VERTIGO photocells

(VERTIGO 8 code ACG8042 - VERTIGO 10 code

ACG8043): wireless vertical photocells substituting the sensitive edge.

- TOUCH Wi-Fi strip

(code ACG3016), with built-in transmitter/receiver.

- TX RED

(code ACG6202): radio transmitter to manage mechanical or

resistive safety strips.

ONTROLS

MASTER Wi-Fi runs up to 100 different remote control codes:

- SUN

dual-channel 433,92 MHz remote controls (code ACG6052)

- SUN

four-channel 433,92 MHz remote controls (code ACG6054)

- SUN CLONE

dual-channel 433,92 MHz remote controls (code ACG6056)

- SUN CLONE

four-channel 433,92 MHz remote controls (code ACG6058)

- BLOCK Wi-Fi

mono-channel 433,92 MHz key selector switch (code

ACG6098).

It is also possible to connect a wired controls with N.O. contact (key
selectors, push-buttons...).

ISUAL SIGNALS

MASTER Wi-Fi can operate one or more

SPARK Wi-Fi Blinkers

(868,3

MHz) code ACG7064.
MASTER Wi-Fi has LEDs for monitoring system status and for identifying
photocells or strips with low or exhausted batteries.

OUND SIGNALS

MASTER Wi-Fi has a buzzer which signals installation phases and a
warning if the batteries are low or exhausted or, acts as an alarm in case
one of the devices is not functioning.

SPARK Wi-Fi

Code ACG7064

NOVA Wi-Fi

Code ACG8037

BLOCK Wi-Fi

Code ACG6098

TOUCH Wi-Fi

Code ACG3016

SUN 4CH

Code ACG6054

SUN 2CH

Code ACG6052