RIB ACG2266W, Инструкция по эксплуатации, Страница: 20 / 44

20
Temporar
y e
xc
lusion of the rain and light sensors
1. Mo
ve the a
wning to the desired position
2.
With the a
wning still in motion press and hold for 5 seconds
the stop key (CLAR
US) or the key of opposite mo
vement
with cabled inputs
3. The control unit shows the disabling of the sensors with 1 flash per second of the yellow LED The rain sensor will disabled only if DIP 3 ON.
Winter mode
Inhibits all the automatic mo
vements.
1. A
wning must be stopped in an
y position
2. Press and hold the c
lose button for 5 seconds
3.
The yellow LED indicates the entr
y of the winter mode with
a blink ever
y 2 seconds
4.
Once the a
wning has
reached the c
losure, it inhibit an
y
automatism
To e
xit the winter mode, it’s sufficient to pro
vide an opening
command.
Learning a transmitter
1.
Press and release the learning key on the card; the red LED lights up
.
2.
Press
“a”
of
the
transmitter
. The
control
unit
also
automatically
memorize the key “b” and the “c” keys. The control unit signals the memorization of the channel with
two flashes of
the red LED
.
Learning a c
limatic sensor
1.
Press and release the learning key on the control unit, the red LED lights up
.
2.
ˆ Press and release the key on the sensor
, the control unit
signals the correct memorization with
two flashes of the red
LED
.
Learning key for trasnmitters and sensor
Radio module
Sbow sensor
12345
678
Internal memory
Clock function
Awning in c losing
Awning in opening
Transmitters keys
Light sensor
Wind sensor
Rain sensor
Light o ver threshold
LED up for:
Wind over threshold
Rain detected
Snow detected
Re-opening after alarm
Cabled inputs
Rain disabling
a c b
Antenna connection
Yellow LED
Blinking: e
xc
lusion
of sensors/sensor
transmission/winter mode
Green LED
Blinking: light o
ver threshold
Off: light under threshold
Red LED
Fix: learning Blinking: alarm
DIP
Function
DIP OFF
DIP ON
1
Re-opening after alarm
Disabled
Enabled
2
Wired push-buttons
Dead man
Impulsive
3
Rain disabling
Can not be disabled
Can be
disabled
4
Transmitters buttons
Direct
Reverse
5
Light sensor
Disabled
Enable
6
Wind sensor
Disabled
Enable
7
Rain sensor
Disabled
Enable
8
Snow sensor
Disabled
Enable