[14]
Keyless Chuck
WARNING!
Do not attempt to tighten
drill bits (or any other accessory) by
gripping the front part of the chuck and
turning the tool on. Damage to the chuck
and personal injury may result. Always lock
off trigger switch and disconnect tool from
power source when changing accessories.
WARNING!
Always ensure the bit is
secure before starting the tool. A loose bit
may eject from tool causing possible
personal injury. Your tool features a
keyless chuck with one rotating sleeve for
onehanded operation of the chuck. To
insert a drill bit or other accessory, follow
these steps.
1)
Turn tool off and disconnect tool from
power source.
2)
Grasp the black sleeve of the chuck with
one hand and use the other hand to
secure the tools. Rotate the sleeve
counterclockwise (as viewed from the
front) far enough to accept the desired
accessory.
3)
Insert the accessory about 3/4" (19
mm) into the chuck and tighten
securely by rotating the chuck sleeve
clockwise with one hand while holding
the tool with the other hand. Continue
to rotate the chuck sleeve until several
ratchet clicks are heard to ensure full
gripping power.
Be sure to tighten chuck with one hand on
the chuck sleeve and one hand holding the
tool for maximum tightness. To release the
accessory, repeat Steps 1 and 2 above.
Belt Hook
WARNING!
To reduce the risk of
serious personal injury, turn tool off and
remove the battery pack before making
any adjustments or removing/installing
attachments or accessories.
An accidental
start-up can cause injury.
WARNING!
To reduce the risk of
serious personal injury, ONLY use the
tool's belt hook to hang the tool from a
work belt. DO NOT
use the belt hook for
tethering or securing the tool to a person
or object during use.
DO NOT
suspend tool
overhead or suspend objects from the belt
hook.
WARNING!
To reduce the risk of
serious personal injury
, ensure the screw
holding the belt hook is secure.
CAUTION
:
To reduce the risk of
personal injury or damage, DO NOT use
the belt hook to hang the drill while using
as a spotlight.
