[12]
ASSEMBLY AND ADJUSTMENTS
WARNING! To reduce the risk of
serious personal injury, turn unit off and
remove the battery pack before making
any adjustments or removing /installing
attachments or accessories.
An accidental
start-up can cause injury.
Installing
and
Removing
the
Battery Pack
NOTE:
For best results, make sure your
battery pack is fully charged.
To install the battery pack into the tool
handle, align the battery pack with the rails
inside the tool’s handle and slide it into the
handle until the battery pack is firmly
seated in the tool and ensure that it does
not disengage.
To remove the battery pack from the tool,
press the release button and firmly pull
the battery pack out of the tool handle.
Insert it into the charger as described in
the charger section of this manual.
INTENDED USE
This drill is designed for professional
drilling, and screw driving applications.
DO
NOT
use under wet conditions or in
presence of flammable liquids or gases.
This drill is a professional power tool.
DO
NOT
let children come into contact with
the tool. Supervision is required when
inexperienced operators use this tool.
Variable Speed Trigger Switch
To turn the tool on, squeeze the variable
speed trigger switch. To turn the tool off,
release the trigger switch. Your tool is
equipped with a brake. The chuck will stop
as soon as the trigger switch is fully
released.
NOTE:
Continuous use in variable speed
range is not recommended. It may damage
the switch and should be avoided.
Forward/Reverse Control Button
The
forward/reverse
control
button
determines the direction of the tool and
also serves as a lock-off button.
To select forward rotation, release the
trigger
switch
and
depress
the
forward/reverse control button on the
right side of the tool.
To select reverse, release the trigger switch
and depress the forward/ reverse control
button on the left side of the tool.
The center position of the control button
locks the tool in the OFF position. When
changing the position of the control
button, be sure the trigger is released.
