32
Navigating the ID Software
ID Instrument View
The left panel in the instrument software replicates the touch screen of the instrument
and has similar functionality. Interacting with software instrument view screen will change
the on screen display and vice-versa, the information remains synchronizedsyncronised
during operation.
1. Buttons-
a. Mouse click the
“play” buttons to begin single or multiple measurement
operations.
b. Click the (X5) on the top right of the multiple reading
“play” button to
change the auto-measurement batch size.
c. Click and hold the tare button to tare the instrument (wait until the button
has stopped spinning before releasing the mouse button)..
2. Measurement Parameters
a. Click on the
T or W
icon to switch between transmission and waviness
values.
b. Click on the
S or C
icon to switch between sharpness and clarity values.
3. Live view/measurement image
The Instrument View includes a live view from the camera or a image from the
selected/last taken measurement.
To select a measurement see-
ID Results Table- View a measurement.
To switch on/off live view see-
ID Settings & Live View Console- Toggle Live
View
.
