background image

OPERATION

TW6072   05/05

Operation Section 4-35

© 2005 Alamo Group Inc.

OPERA

T

ION

The SMV (Slow-Moving Vehicle) emblem is
universal symbol used to alert drivers of the
presence of equipment traveling on roadways at a
slow speed.  SMV signs are a triangular bright
orange with reflective red trim for both easy day
and night visibility.  Make sure the SMV sign is
clean and visible from the rear of the unit before
transporting the tractor and implement on a public
roadway.  Replace the SMV emblem if faded,
damaged, or no longer reflective.

   OPS-U- 0020

Make sure that all tractor flashing warning lights,
headlights, and brake/tail lights are functioning
properly before proceeding onto public roads.
While newer model tractors have plenty of lighting
to provide warning signals and operating lighting,
most older models are only equipped with
operating lights.  Consult an authorized tractor
dealer for lighting kits and modifications available to
upgrade the lighting on older tractor models.

OPS-U- 0021

When operating on public roads, have
consideration for other road users. Pull to the side
of the road occasionally to allow all following traffic
to pass.  Do not exceed the legal speed limit set in
your country for agricultural tractors. Always stay
alert when transporting the tractor and implement
on public roads. Use caution and reduce speed if
other vehicles or pedestrians are in the area.

OPS-U- 0022

Содержание RW72















































































































































Отзывы: