manualshive.com logo in svg

RHINO RHINO FX17, Руководство оператора

Поделиться
Скачать
RHINO RHINO FX17 Скачать руководство пользователя страница 122

OPERATION

FX17/FX21  02/11

Operation Section 4-24

© 2011 Alamo Group Inc.

OPERA

T

ION

9.3 Operating the Mower Wings

Transport Position

To raise the mower for transport, drive the unit to
a level area, pull the rope to open the transport
locks and retract the hydraulic cylinders. DO NOT
raise wings with the mower positioned on an
embankment or other inclined position to prevent
overturning the mower. DO NOT raise the mower
until all blade movement has come to a complete
stop. After each section is fully raised, release the
rope to engage the transport locks. Ensure
transport locks have engaged on each section to
prevent unexpected falling.

9.2 Brake and Differential Lock Setting

Make sure the tractor brakes are in good operating
condition. Tractor brakes can be set to operate
independently allowing single rear wheel braking
action or locked together to provide simultaneous
rear wheel braking.  FOR MOST DRIVING AND
OPERATING CONDITIONS, THE BRAKE PEDALS
SHOULD BE LOCKED TOGETHER TO PROVIDE
THE MOST EFFECTIVE BRAKING ACTION. 

Always disengage the tractor differential lock when
turning. When engaged the differential lock will
prevent or limit the tractor from turning. During
normal cutting conditions, locking the differential
provides no benefit and should not be used.  

OPS-

U- 0013

Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes.
When operating down a hill or on wet or rain slick roads, the braking distance increases; use
extreme care and reduce your speed in these conditions. When operating in traffic, always
use the Tractor’s flashing warning lights and reduce your speed.   Be aware of traffic around
you and watch out for the other guy.

Содержание RHINO FX17





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды