RHINO RD160 E3, Руководство оператора

Страница: 51 / 85

51
Rhino RD160 E3/E4
Pre-Opera ve Checklist:
Ÿ
Visually inspect the worksite before star ng sweeping opera on.
Ÿ
Ensure that the operator is aware of the type of material to be collected.
Ÿ
Ensure that there are no flammable materials in the vicinity of the
machine during the sweeping opera on.
For the machine:
Worksite:
Start-Up Test:
Driving in/around worksite:
By iden fying any problems before traveling to the worksite, you’ll save
unnecessary travel me and will be able to make repairs more easily with the
proper tools.
Always follow the rules and regula ons of the worksite while driving the
machine.
While traveling the worksite road, always maintain a safe speed for the haul
road condi ons and grades. Never allow the machine to coast.
Pay a en on to worksite road condi ons to avoid rocks, holes, or other
obstacles. Such obstacles not only present hazards to safe opera on, but can
needlessly damage tyres if not avoided.
Always maintain a safe distance behind the machine ahead, par cularly on
downgrades. A good rule-of-thumb to follow is to allow two (2) machine-
lengths between machines for each 10 km/h of travel speed under normal
opera ng condi ons. Under adverse condi ons, allow more room for safe
opera on. Such regula ons would be established for the safety of everyone
on the job.
Never operate the machine in a closed building or without
adequate ven la on. The exhaust fumes can be hazardous to
your health.
WARNING
MACHINE OPERATION
ü Check the engine oil level.
ü Check the engine coolant level.
ü Check the radiator and oil cooler fins for debris.
ü Check the hydraulic oil level.
ü Check the air filter indicator.
ü Check the seals and skirts for wear and damage.
ü Check the condi on of the main/side brooms. Remove any straps, bands,
ropes or other debris wrapped around them.
ü Check the sweeping pa ern.
ü Check the hopper dust filter for blocks or damage.
ü Check the hopper seals and gaskets for wear and damage.
ü Check the brakes and steering for proper opera on.
ü Check the fuel level.
ü Check if the debris hopper is empty.
ü Check the air pressure if equipped with pneuma c res.
ü Check for proper func on of all electrical systems.
ü Check the brake oil level.
ü Check the tension of the belts.