RHINO RD160 E3, Руководство оператора

Страница: 39 / 85

39
Rhino RD160 E3/E4
The parking brake is used to hold the vehicle sta onary when being parked
a er use. The parking brake lever is located below the steering column
towards the le hand side.
13. Parking Brake Lever:
To Set: Pull the parking brake lever up.
To Release: Push the parking brake lever down.
Note: Parking brake is intended for use only a er the machine has come to a
complete stop. Do not use it on a moving machine unless it is an emergency.
The vacuum by-pass switch is used to ac vate the by-pass feature of the
sweep mechanism to prevent any fluids entering the filters, which may cause
damage.
The filter shaker switch is used to ac vate the vibrator motors to shake off
fine dust which are held within the filter, this feature improves the filtra on
capacity of the filters. Shu ng the vacuum by-pass during shaking improves
the cleaning effec veness.
Switch posi on up: Vacuum by-pass On
Switch posi on neutral: Vacuum by-pass Off
Switch posi on down: Filter shaker On
14. Vacuum By-Pass/Filter Vibrator Switch:
CONTROLS