RHINO LOADER 4211 MSL страница 82 Скачать руководство пользователя

Страница: 82 / 104

OPERATION

4211-4211SS MSL 01/11

Operation Section 4-36

OPERA

ION

Leave dirt which drifts over side of bucket for final
cleanup.

Pile dirt on high side for easier backfilling on a
slope.

HANDLING LARGE HEAVY OBJECTS

Using front end loaders for handling large heavy objects such as large round or rectangular bales, logs

and oil drums is not recommended.

Handling large heavy objects can be extremely dangerous due to:

•

Danger of tractor rolling over.

•

Danger of up-ending tractor.

•

Danger of object rolling or sliding down loader arms onto operator.

If you must perform above work, protect yourself by:

•

Never lifting load higher than necessary to clear ground when moving.

•

Ballasting tractor rear to compensate for load.

•

Never lifting large objects with equipment that does not have an anti-rollback device.

•

Moving slowly and carefully, avoiding rough terrain.

•

Tilt bucket forward while lifting to maintain bucket angle.

Содержание LOADER 4211 MSL









































































































Результаты поиска

Содержание LOADER 4211 MSL

Отзывы:

Похожие инструкции для LOADER 4211 MSL

Бренды по названию

Популярные бренды

RHINO LOADER 4211 MSL, Руководство оператора

Результаты поиска

Содержание LOADER 4211 MSL

Отзывы:

Похожие инструкции для LOADER 4211 MSL

Бренды по названию

Популярные бренды