RHINO LOADER 4211 MSL Скачать руководство пользователя | Manualshive

Страница: 16 / 104

background image

SAFETY

4211-4211SS MSL 01/11

Safety Section 1-12

© 2011 Alamo Group Inc.

SAFETY

Connecting or Disconnecting Implement Safety Instructions and

Practices

Do not stand or allow bystander or coworkers between the loader and the
tractor while installing or disconnecting the loader from the tractor. Keep
hands and body clear of the loader and the loader mounts. Serious injury
or death can result from a person being crushed between the tractor and
loader.

(SL-03)

Never allow anyone to get under the loader or attachment or to reach
through the loader lift arms when raised. Serious injury could result from
crushing or pinching by the loader or attachment.

(SL-06)

Make sure the loader is properly attached to the tractor and the retaining pins securely lock
the loader into position. Improper mounting of the loader onto the tractor can result in the
loader falling causing serious injury.

(SL-23)

Make sure all tractor and loader guards are in place and properly functioning. Do not use an
attachment if the roll back guards are damaged or missing. The roll back guards prevents
items carried in the attachment from rolling back onto the operator causing serious injury.
For added safety when lifting loads above the height of the operator, install a certified
Falling Object Protective Structure.

(SL-28)

«
...
14
15
16
17
18
...
»

Содержание LOADER 4211 MSL









































































































Отзывы:

Нет отзывов

Похожие инструкции для LOADER 4211 MSL

Бренд: Sealey Страницы: 2

Telehandler TH412

Бренд: Wacker Neuson Страницы: 362

Бренд: Case Страницы: 280

Бренд: Topcon Страницы: 39

460 Hydro-Scopic

Бренд: Badger Equipment Company Страницы: 4

Бренд: Buhler Страницы: 28

Бренд: Buhler Страницы: 28

Бренд: Buhler Страницы: 36

Бренд: Buhler Страницы: 34

Бренд: Buhler Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды