RHINO GPD-40 Fence Pro, Руководство пользователя

Страница: 9 / 28

7
Slide thumb switch on throttle handle
down or into the ON position.
Grasp the starter grip lightly until you feel
resistance, (Fig. 5) then pull briskly in the
direction of the arrow as shown below.
Return the starter grip gently.
Do not extend the starter rope to its full
length as it can cause damage the recoil
mechanism
An operator should
never wrap the starter
rope around their hand. This will cause
serious injury.
Do not allow the starter grip
to snap back against the
engine. Return it gently to prevent
damage to the starter .
If the choke lever was moved to the
CLOSED position to start the engine,
gradually move it to the open position
as the engine warms up. As the engine
warms up also release the high idle lock
by slightly depressing the trigger and then
immediately releasing it. Use caution as to
not engage the clutch.
Hot Restart
If the engine is operated at higher ambient
temperatures, then turned off and allowed
to sit for a short time, it may not restart on
the first pull. If necessary, use the follow -
ing procedure:
Failure to follow instructions can result in
personal injury
IMPORTANT
SAFETY
PRECAUTION
Turn the engine switch to the
OFF
position before performing the following
procedure. This will prevent the engine
from starting and running at maximum
speed when the throttle is in the
MAX
.
speed position. If the engine starts with
the throttle in the
MAX
. speed position,
the post driver will operate at maximum
power. This may result in
personal injury
and damage to the post driver.
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
GPD-40 Fence Pro
™
Operating Instructions... continued
Choke Closed
Choke Open
Priming Bulb
Fuel Return
Line (clear
plastic tube)
Fig. 3
Fig. 4
Starter Grip
Fig. 5