RHINO GPD-40 Fence Pro, Руководство пользователя

Страница: 8 / 28

6
AVOID SERIOUS
INJURY OR DEATH
READ THIS MANUAL BEFORE
USING YOUR POST DRIVER
Visually inspect your GPD-40 Fence Pro
™
Post Driver before use. The interior of the
chuck tube should be checked for obstruc-
tions, damage or wear to the chuck tube
and anvil inside. The outer surfaces of the
driver should also be inspected for any de-
fects. Do not use the GPD-40 Fence Pro
™
if there is any damage or wear until the
damage or wear is corrected and repaired.
Check all fluid levels, i.e. engine oil and
fuel and fill as needed as per manufac -
turer’s specifications.
Proper oil level is essential
to the operation of the post
driver. Overfilling of the oil will result in
loss of power and may cause perma -
nent damage to the engine .
USE ALL
RECOMMENDED
SAFETY EQUIPMENT.
Rest the driver on a solid surface, i.e.
tailgate, bench, or clear, solid ground and
posture your body in a safe position. DO
NOT start the driver anywhere but an
open, well-ventilated area. It is recom-
mended that the GPD-40 Fence Pro
™
only be used outdoors and never inside an
enclosed building.
Starting the Engine:
To start a COLD engine, move the choke
lever to the CLOSED position (Fig. 3) .
Lock the throttle into high idle position.
(Fig. 2) This is done by depressing the
trigger and the high idle lock simultane-
ously. The throttle is now in the high idle
position.
To start a WARM engine, leave the choke
lever in the OPEN position and do not
lock the throttle into the high idle position.
Press the priming bulb repeatedly
(Fig. 4)
until fuel can be seen in the clear-plastic
fuel return tube.
GPD-40 Fence Pro
™
Operating Instructions... continued
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
Thumb Switch
High Idle Lock
Trigger
Upper limit of
engine oil .
Lower limit of
engine oil is end
of dipstick .
Fig. 1
Fig. 2