RHINO Flex 15 Nitro, Руководство оператора

Страница: 95 / 166

OPERATION
FN10/FN15 NITRO 02/10 Operation Section 4-3
© 2010 Alamo Group Inc.
OPERA
T
ION
1.
Standard Equipment and Specifications
FN15 NITRO FN10 NITRO
Cutting Width 180” 126”
Transport Width 90-3/4” 86-3/8”
Overall Width 186” 133”
Overall Length 183” 183”
Cutting Height 1-3/4” - 14-1/2” 1-3/4”-14-1/2”
Hitch HD Clevis HD Clevis
Blade Overlap 6” 6”
Blade Carrier HD Pan HD Pan
HP Required (Min.) 50 HP 40 HP
Gearbox Rating
Power Divider
325 HP 325 HP
Center Wing 285 HP 285 HP
Output Shaft Diameter 2-9/16” 2-9/16”
Blade Tip Speed:
Center 540 RPM
15,162 FPM 13,995 FPM
1000 RPM 13,709 FPM 13,709 FPM
Wings 540 RPM 15,162 FPM 15,162 FPM
1000 RPM 14,851 FPM 14,851 FPM
Cutting Capacity (Max.) 5” Diameter 5” Diameter
Driveline Size
Main,44R or CV
CAT 6 CAT 6
Wings CAT 6 CAT 6
Deck Thickness 7 Ga. 7 Ga.
Side Skirts: Replaceable 1/4”x10-1/2” 1/4”x10-1/2”
Replaceable Skid Shoes Std. Std.
Wing Flex 90 Degrees up, 22 Degrees Down
Safety Deflectors Std. Std.
Wing Lift. Hyd. Std. Std.
Jackstand Std. Std.
Weight (Approx.) 5960 lbs.* 6080 lbs.*
Tractor Static Vertical Drawbar 3200 lbs. 3200 lbs.
Load Rating (Min.)
Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment at
extra cost. Servis-Rhino recommends mowers be equipped with deflectors or double chain guards for all
mowing purposes. Single chain guards may be used for agriculture purposes only and are specifically not
recommended for highway, right-of-way, parks or greenbelt mowing.
Ratings based on actual field performance.
*Weight includes single chain guards.