KF-50-OTM Instruction Book KF-50 Issue 1
Page 8 KF-50 Patent Pending
Chapter 1 “Out of the Box” initial Setup Continued…
See Figure F. Place the Coil Guide Assembly’s Coil Guide Support onto the
loosened screw as shown. Center the Coil Guide Assembly Coil Guides into the
slot in the main body of the KF-50 Crimper and tighten screw. The KF-50 will look
like the various views below.
Fig. F
2) Installation:
¾
2.1) KF-50KB:
The KF-50KB is pre-installed, Please go to Chapter 3.
¾
2.2) KF-50 Mounted to a HD-4170 or PC-248: See Fig. G
The KF-50 Mounting procedure is identical for both HD-4170 and PC-248. The
KB-50 is mounted to the front-right of both machines and mounting screw
placement is the same.
Fig. G
