KF-50-OTM Instruction Book KF-50 Issue 1
Page 7 KF-50 Patent Pending
Chapter 1 “Out of the Box” initial Setup Continued…
See Figure E. Place the short leg of the Book End Stop (1) (arrow points to long
leg) into the ‘same size hole as the stop’ shown at (8) on the crimper. Loosen the
2-winged Finger Screw (9) to allow the Book End Stop to pass, and then tighten
the Finger Screw onto the Book End Stop. Orient as shown. Fine adjustment will
be made later in this manual. Loosen screw (7) several turns or 1/8” as shown.
Hold and align the Front Coil Guide (2) to the Coil Guide Support (4) as shown.
Hold and align the Rear Coil Guide (4) to the top of the Front Coil Guide (2) as
shown. Fasten these three items together with the Coil Guide Clamp Screw (5)
creating the Coil Guide Assembly. (This step may have already assembled by
the factory)
Fig. E
