19
Basic Water Heater Operation
settings
Temperature Display
Fahrenheit
Screen Adjustment Lock?
No
Beep On Alarm
Enabled
EcoNet Network Instance 1
High Temp Adjust Enable No
Elec. Heat Override Time 3 days
settings
Temperature Display
Fahrenheit
Screen Adjustment Lock?
No
Beep On Alarm Enabled
EcoNet Network Instance 1
High Temp Adjust Enable
No
Elec. Heat Override Time 3 days
settings
Temperature Display
Fahrenheit
Screen Adjustment Lock?
No
Beep On Alarm Enabled
EcoNet Network Instance
1
High Temp Adjust Enable No
Elec. Heat Override Time 3 days
settings
Temperature Display
Fahrenheit
Screen Adjustment Lock?
No
Beep On Alarm Enabled
EcoNet Network Instance 1
High Temp Adjust Enable No
Elec. Heat Override Time
3 days
Beep on Alarm
: The audible Alarm tone can
be disabled during service periods.
To Enabled/Disabled the audible alarm, press
"Enabled" to highlight, then press up/down
buttons to change to Enabled/Disabled.
EcoNet Network Instance:
This number can
be set between 1 and 32. Instance is the way
an EcoNet network identifies each appliance
of the same model on the network.
To change the instance number, press "1" to
highlight, then change the number pressing
the up/down buttons.
High Temperature Enable:
This setting
can be set to “Yes” if a tank temperature
higher than 140°F is desired. This setting will
automatically turn “No” after 10 minutes of
inactivity on the user interface.
To enable or disable temperature adjust, press
"No" to highlight, then press up/down buttons
to change to Yes/No.
Elec. Heat Override Time:
This setting can
be set from 1 to 7 days and will return the unit
to the previous (more efficient) mode after the
set number of day is complete.
To set the days, press "3 days" to highlight,
then press up/down buttons to adjust the days.
