manualshive.com logo in svg

Rheem 627 series, Руководство пользователя и инструкции по установке, Страница: 4 / 56

Поделиться
Скачать
Rheem 627 series Скачать руководство пользователя страница 4

 

4 

ABOUT YOUR WATER HEATER 

 

WATER HEATER APPLICATION 

This water heater is designed for the purpose of heating potable water. Its use in an application other than 
this may shorten its life. 
 

MODEL TYPE 

The  Rheem

®

  continuous  flow  gas  water  heater  model  you  have  chosen  is  for  indoor  installation  only.  This 

model has an extended 

manufacturer‟s warranty (refer to 

the Rheem warranty

 on page 55). 

 
The water heater has a maximum preset outlet temperature setting of: 

 

862 series 

82°C 

 
If  a  temperature  controller  is  connected  to  the  water  heater,  this  will 
override  the  preset  outlet  temperature  setting  and  the  maximum 
temperature setting will be: 

 

Kitchen controller connected 

60°C 

 

Bathroom controller only connected 

50°C 

 

WATER HEATER OPERATION 

The  water  heater  operates  automatically,  heating  water  as  it  passes 
through  the  water  heater.  When  a  hot  tap  is  opened,  the  gas  burners 
ignite to provide immediate heating of the water. The heat produced by 
the burner is transferred to the water through the heat exchanger. The 
water is heated to a constant temperature by the automatic adjustment 
of  the  gas  supply  to  the  burner  to  suit  the  water  flow  rate.  The  gas 
burners extinguish when the hot tap is closed. 
 
Automatic safety controls are fitted to the water heater to provide safe and efficient operation. 
 

GAS BOOSTING FOR A SOLAR WATER HEATER 

The  862 series  water  heater  may  be  installed  as  an  in-series  gas  booster  to  a  solar  water  heater.  For 
information relating to the function and  operation of the solar  water heater, refer  to the 

Owner‟s Guide and 

Installation Instructions supplied with the solar water heater. 
 
Water stored in the solar storage tank passes through the  in-series gas booster when a hot tap is opened. 
Solar  heated  water  can  reach  temperatures  up  to  70°C  to  80°C  for  a  Premier  Loline  and  Loline  pumped 
system and a Hiline thermosiphon system and possibly higher for a Premier Hiline thermosiphon system. 
 
The  in-series  gas  booster  is  for  heating  water  at  times  of  low  solar  energy  gain,  such  as  during  cloudy  or 
rainy weather, or during colder months. The in-series gas booster operates automatically. 
 
When  the  solar  heated  water  is  at  a  temperature  higher  than  2°C  below  a  water  heater  preset  outlet 
temperature  setting  of  up  to  75°C  (i.e.  68°C  or  above  if  the  preset  outlet  temperature  setting  is  70°C)  or 
higher than 4°C below a water heater preset outlet temperature setting of 82°C,  the flow passes through the 
in-series  gas  booster  without  boosting.  When  the  solar  heated  water  is  at  a  temperature  lower  than  2°C 
below  a  water  heater  preset  outlet  temperature  setting  of  up  to  75°C  (i.e.  below  68°C  if  the  preset  outlet 
temperature  setting  is  70°C)  or  lower  than  4°C  below  a  water  heater  preset  outlet  temperature  setting  of 
82°C, the in-series gas booster heats the water to a minimum  temperature of the preset outlet temperature 
setting. 
 

 

 

Содержание 627 series

























































Отзывы:

Нет отзывов