The light source is attached to the frame and cannot be removed.
W A R N I N G :
This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
1.
Carefully remove all parts from the box and remove all plastic
coverings.
2. Place the Outer Glass Shade (C) over the column, then thread
Adjust the glides at the bottom for stability.
3.
C A R E I N S T R U C T I O N S
Wipe all surfaces with a soft, dry cloth. Do not use any harsh cleaners
(including ammonia-based products) or abrasives on the lantern, as
the Inner Glass Shade (B) onto the column to secure both glass
they may damage the finish.
Page 2 of 2
4.
Assembly is complete. Click the switch once to test the lantern.
shades.
T H I S P R O D U C T I S N O T A T O Y A N D H A S N O P L A Y
V A L U E .
E A S Y A S S E M B L Y , R E Q U I R E S N O T O O L S O R W I R I N G .
This lantern can be used as a pathway light to illuminate stairs,
as a decorative lantern in your garden or path, or as a portable
lantern.
N O R I S K O F E L E C T R O C U T I O N .
The light source includes a solar panel, 2 lithium phosphate batteries,
6 LEDs, a motion sensor that detects movement up to 2 meters and an
ON/OFF switch. The solar panel converts sunlight into electricity and
recharges the batteries (batteries are not replaceable). The batteries
A. Click the switch once to turn on the light for the first time.
power the LEDs.
The LEDs generate 10-360 lumens depending on the lantern size.
B. Keep the switch in the ON position. The light will automatically turn
off during the day and turn on at night. If the lantern won’t be used for
a long period of time, click the switch twice to turn off.
1. When the motion sensor detects movement up to 2 meters, the
light intensity is at 100%.
2. When movement is more than 2 meters away, the light intensity
decreases to 20%.
3. After 4 hours with no movement detected, the light intensity
decreases to 10% to conserve battery power.
If the lamp does not work, the batteries may need to be charged. Place
the lantern under the sun for a day or two, depending on your location and
the time of the year. Keep the solar panel clean. Do not position the lantern
T R O U B L E S H O O T I N G
high-pressure water may get in and damage the electronics and batteries.
near a sprinkler. The lantern is designed to be weatherproof, but over time,
Do not leave the lantern outside during snowy or inclement weather conditions.
A S S E M B L Y & I N S T A L L A T I O N
4. The light comes on ONLY when motion is detected.
THE MOTION SENSOR FUNCTION
MANUALLY OPERATING THE ON/OFF SWITCH
T O U L O N S O L A R L A N T E R N I N S T R U C T I O N S
