IXTAPA FIRE TABLE OWNER’S MANUAL
15
CLEANING
Inspect the appliance before initial use. Clean the
appliance and have it inspected by a qualified field
service technician at least once a year.
Periodically examine the burner. If the burner is
dirty, clean it with a soft wire brush. Also examine
the area around the burner air shutter. Remove any
dirt or debris in this area to ensure long life and
trouble-free operation of the appliance.
The easiest way to clean the fire table burner is
to let it cool off completely after heating and then
spray the enclosure with water.
DO NOT
spray water
directly onto the burner.
For routine cleaning of the fire table, wipe down
with a damp cloth or sponge. Avoid using any
cleaners, as they may contain chemicals that could
cause discoloration. To remove stains, use a marble
or granite stain remover, available at any home
improvement store.
When no longer in use and after completely cooling
off, cover your fire table with a full-length cover
to protect from detrimental weather effects and
environmental pollutants.
Before placing the cover on the fire table, make sure
the unit is shut off and has had sufficient time to
cool. Also make sure the gas lines are disconnected.
Then, place the cover over the unit, using the straps
to secure it against the wind.
More frequent cleaning may be required. It is
imperative that the control compartment, burner
and circulation passageways be kept clean and free
of any obstruction.
MAINTENANCE
Periodically check the hose connecting the propane
gas cylinder to ensure it is not cracked or damaged
in any way.
Spiders and insects can nest in the burners and
block the gas and airflow to the ports. This can
create a dangerous obstruction that can cause a
fire from behind the valve panel. Inspect and clean
the burners periodically.
Any guard or other protective device removed
for servicing must be replaced prior to operating
the appliance.
If there is excessive abrasion or wear of any of the
components, or if the fuel supply hose is cut or
cracked, they must be replaced prior to operating
the appliance.
Inspect the fuel supply connection for signs of
leakage before each use of the appliance.
Do not attempt to repair or replace any part
of the fire table on your own. Have a qualified
technician perform all service. Any repairs made
by a non-approved service technician will void
your warranty.
STORAGE
When your fire table is not in use, turn off the gas
at the source.
This appliance can only be stored indoors if it has
been disconnected from its fuel supply.
Store propane cylinders outdoors in a well-ventilated
area and out of the reach of children. Disconnected
cylinders must have threaded valve plugs firmly
installed and must not be stored in a building,
garage or any other enclosed area.
To extend the life of your fire table, protect and
cover it from the elements when not in use. Before
installing the storage cover, ensure the appliance
has had ample time to cool off. Damage caused
to the storage cover due to heat or burns is not
covered by the warranty.
FIRE TABLE
The fire table is warranted to be free from defects in
material and workmanship for one year from the date
of purchase.
If a part proves to be defective under normal use, the
part will be repaired or replaced. Our obligation under
this warranty is to repair or replace defective parts at our
discretion. If we determine that repair of a covered item is
not feasible, we reserve the right to replace the defective
merchandise with merchandise equal in value to the
original purchase price.
Warranty repair or replacement are the sole discretion
of Eldorado Stone and this warranty does not cover costs
therein, including but not limited to: freight, removal,
re-installation, etc.
There will be no charge for parts on a covered item.
However, cost of labor is the responsibility of the owner.
Shipping and handling charges will apply to all warranted
replacement parts. The service agent may assess a
reasonable travel or mileage charge per service call.
This limited warranty applies only to fire tables normally
used for personal, family, or household purposes and
specifically excludes rental or commercial applications.
This warranty is non-transferable.
Decorative stones and decorative glass are not covered
by this warranty.
This warranty is void if the fire table has been subject
to negligence, alteration, misuse, repairs, dings, dents,
scratches, or incorrect and/or prohibited applications as
specified in the owner’s manual.
Natural gas lines must be installed by a licensed plumber
only or local gas company agent.
The original purchaser acknowledges and agrees that
this product is a handmade, hand-finished product. Each
piece is unique. Any samples provided are typical of
texture, finish, individual characteristics, and color but they
should not be considered exact representations of the
final product. There can be up to a 15% variation in color
and texture from piece to piece. In addition, shape detail
can vary as much as ¼” in size. The texture created by
entrapped air ranges from smooth to randomly indented.
Minor chipping, water staining, and non-structural hairline
cracks are also traditional characteristics of this product.
As with natural stone, color will vary on individual orders
and among individual pieces in the same order. As
with natural stone, excessive heat exposure may cause
discoloration. As fire tables age, color may lighten or
darken according to specific field or storage conditions
such as humidity, temperature, and exposure to sunlight
BRASS BURNER
Manufacturer warrants the burner to be free from
defective material and workmanship for 10 years from
the date of purchase. The burner warranty covers
manufacturing defects only and does not cover defects
due to normal wear and tear; it does not warrant any
product or part that has been altered, accidentally
damaged, damaged in shipping, disassembled, modified,
misused, neglected, failure to maintain, not installed, or not
kept in continuous service after installation. Manufacturer’s
liability shall be restricted to the purchase price of the
product only and makes no other warranty, express or
implied, but not limited to, the implied warranties of
salability and appropriateness for a specified purpose,
with respect to its products and parts, whether used
along or in combination with others. Manufacturer is
free of liability for any damages caused by the unit,
as well as inconvenience expenses, material or labor
charges incurred by any service call, repair, removal or
re-installation of any unit. Incidental or consequential
damages are not covered by this warranty. All burners
must be covered when not in use or warranty is null and
void. Warranty does not cover damage to systems due to
debris in the gas lines or damage to system due to water.
Owner is responsible for reading and understanding
warranty for full terms and conditions. Manufacturer, at its
discretion, agrees to repair or replace defective product if
returned to manufacturer within the warranty period. The
respective warranty time periods are effective from the
original date of purchase. The warranty is non-transferable
and applies only to the original purchaser. In addition, this
warranty is automatically void if the unit’s serial number
has been removed or altered in any way.
No dealer, distributor, or other person has the authority
to represent or warrant burner product beyond the
terms contained within this warranty, and manufacturer
assumes no liability for such warranty representations. Any
questions concerning this warranty should be directed to
the manufacturer’s corporate office..
RETURN POLICY OF BURNER PRODUCT
Any burner product deemed by manufacturer as
defective and covered by the warranty may be returned
to manufacturer for assessment to determine if repair or
replacement is necessary. In order to return a product, you
must have a Return Merchandise Authorization number
(RMA#). Please contact a manufacturer representative
at the corporate office to obtain an RMA#. All returned
merchandise must have the RMA# clearly printed on the
outside of the package. Return shipping costs are the
purchaser’s responsibility. Manufacturer is not responsible
for product damaged or lost in transit. It is recommended
that return items are shipped via a delivery service that
can be tracked and/or insured to confirm receipt.
CLEANING, MAINTENANCE & STORAGE
WARRANTY
