36
User Manual | rgnt-motorcycles.com
20. Troubleshooting
20.1. First hand troubleshooting
If motorcycle won’t turn on
1. Make sure the bike has been activated by pressing one of the brakes for 1-2 seconds.
2. Present the key to the top left corner of the triangle box on the left hand side of the bike, and kept
there for a few seconds.
NOTE! If you have trouble turning on your motorcycle, always check the charge level. Charge if
necessary and try again.
If the motorcycle won’t charge, press the reset button under the triangle box, press for 5-6 sec. The
charger is active when the chargers light indicator is showing red and the display of the motorcycle
shows charging mode with the RGNT logo and battery % .
If motorcycle won’t turn on proceed with: Reset
3. Push and hold the reset button on the underside of the triangle box for 5-6 sec. simultaneously as
presenting the key in the upper left corner of the triangle box.
If motorcycle won’t turn on proceed with: Reboot
4. Reboot the system by putting the side stand up, activate the high beam and set indicator to the
Left.
5. Push and hold the horn button and hazard switch. While doing this, press and release the brake.
6. Proceed to do a the normal starting procedure
NOTE! We recommend charging your RGNT Motorcycle after every time you use it.
During regular usage, it is important to charge the battery to 100% at least once a week.
If longtime storage of the bike, charge the battery to 100% once every 30 days.
The motorcycle needs to be in an environment above zero degrees celsius to be able to charge. If the
environment is below zero degrees celsius, the charger will not work.
If you have any problem regarding the bike, please contact the RGNT After Sales team at
[email protected].
