24
25
User Manual | rgnt-motorcycles.com
13.2. How to charge
1. Open the charging connector cover on the right side of the battery. Press the button on the left
side of the lid and the lid will flip open.
2. Connect the charger’s electric plug to any household europort. The europort must have a min 8A
fuse for the charger to work.
3. Connect the charge cable to the connector on the bike (the charger connector is a bayonet type).
Twist to get the contact in place and then secure by twisting the bajonett.
4. The charger should now indicate a red light and the small fan on the charger is active. If this is not
the case, press the button under the triangle box on the left side of the motorcycle 4-5s to put the
bike in charge mode.
5. The RGNT symbol appears on the display and the current battery charge status is shown. After a
few seconds the display switch to black in “sleep mode”.
6. If you want to know the current battery charge status, press the right or left brake handle and the
display will show on display.
7. The charging is complete when the display shows 100% and the light indicator on the charger
switches from red solid light to green flashing light (or steady light on 1.0 model). For best possible
battery health we recommend charging the motorcycle before and after each use and always
complete the charge cycle until the charger switches from red to green light.
NOTE! The battery will not charge if the environment temperature is below 0 degrees. If the charger
shows green light, the charger is not active. If the temperature is above 0 degrees and green light is
showing, it may be because the motorcycle is l00% charged. If this is not the case please contact RGNT
Customer support for help.
Charging
Charging Connector Outlet
Picture shows while charging
RGNT Customer Support
Email: support@rgnt-
motorcycles.com
Phone: +46 (0) 702 161 810
