User Manual
UM-OctaneSub4-018-US
Octane Sub4 User Manual |
8
Item
Initially
Inspec
t/
Adjust W
eek
ly
Inspec
t/
Adjust M
on
thly
Inspec
t/
Adjust Year
ly
General
•
Wheelchair rolls straight (no excessive drag or pull to one side)
•
Inspect frame for cracks and damage
•
Inspect all fasteners are secured
Seat and Back Upholstery
•
Inspect for rips or sagging
•
Inspect fastening flaps to ensure they securely latch
Rear Wheels
•
Adjustable axle position camber bar is securely tightened
•
Quick/quad release axles lock properly
•
No excessive side movement or binding when lifted and spun
Handrims
•
Inspect for signs of rough edges or peeling
Spokes
•
Inspect for bent or broken spokes
•
All spokes uniformly tight
Front Castor
•
Inspect wheel/fork assembly for proper tension by spinning castor; castor
should come to a gradual stop
•
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop
•
Wheel bearings are clean and free of moisture
CAUTION: As with any vehicle, the wheels and tyres should be checked
periodically for cracks and wear, and should be replaced when necessary
Tyres
•
Inspect for flat spots and wear
•
If pneumatic tyres check for proper inflation
CAUTION: As with any vehicle, the wheels and tyres should be checked
periodically for cracks and wear, and should be replaced when necessary
Cleaning
Wheel Locks
•
Do not interfere with tyres when rolling
•
Pivot points free of wear and looseness
•
Wheel locks easy to engage
Safety Inspection Checklist
Safety Inspection Checklist
NOTE:
Regular cleaning will help to highlight any loose or worn parts and enhance the smooth operation of your
wheelchair. To operate properly and safely, your wheelchair must be cared for just like any other vehicle. Routine
maintenance will extend the life and efficiency of your wheelchair. Initial adjustments should be made to suit your
personal body structure and preference. Thereafter follow these maintenance procedures. Outlined below:
