User Manual
UM-OctaneSub4-018-US
Octane Sub4 User Manual |
10
1.1: Adjusting Seat
Remove the cushion from the wheelchair. The seat is
adjusted by increasing or decreasing the tension in the
straps on the underside of the seat (Fig 15). To remove,
release all the straps and remove.
Fig 15.
Fig 14.
WARNING:
The position of the footrest, camber tube and
rear seat height, as well as the tautness of the
back upholstery are directly related to the chair’s
stability. Any change to one or any combination
of the four may cause the chair to decrease in
stability. Use EXTREME caution when using a new
seating position for the first time.
CAUTION:
Velcro used on upholstery may cause property
damage if contacted closely.
Procedure 1 - Upholstery
Procedure 1
Fig 16.
1.2: Adjusting Backrest
Remove the cushion and centre pad from wheelchair (Fig
14). The backrest is adjusted by increasing or decreasing the
tension on the straps at the back of the backrest. To remove,
release all the straps and remove.
1.3: Changing Cushion Cover
Remove cushion from the wheelchair. Open the Velcro
pocket at the rear of the cushion and remove or replace
foam as required. (Fig16).
The upholstery is fully adjustable and can be easily adjusted
to provide the correct balance and comfort in your new
wheelchair.
