© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| [email protected] | www.rgblink.com
29
5) User can also to verify network connection as steps above mentioned after the finish of camera self-check.
If IP is default, open DOS command window and input 192.168.5.163,then press Enter key. It will show message
as below: which means network connection is normal.
3.5 IE Log In
3.5.1 Web client
1) Web client Log In
Input the IP address 192.168.5.163 of the device in the address filed of browser and click Enter button to
enter into Web Client login page as below picture. User can login as administrator and normal user. If login as
administrator (Default User name/Password: admin), users can preview, playback, configuration and cancel in the
Web Client; If login in as normal user(Default User name/Password:user1 or user2),users can only preview,
playback and cancel, no option for configuration.
Note: Web access supported browsers: IE,360 browser,Google browser and other conventional browser.
2) Download/Install Plug in
When first using IE browser to access the web conferencing camera, the login page will appear “Playback
plug-in is not installed, please download and install!”. Click on this message, download and install MRWebXinstall.
exe, according to information prompts.
After installing the plug, enter user name and password, click and Sign (initial default user name and
password: "admin", users can change the user name and password on their own after entering) into the Web
client management interface.
3.5.2 Preview
After successful login into the management interface, it enters the video preview interface. In the preview
screen, users can control PTZ, zoom, focus, video capture, sound, focus, full screen and set the preset position,
run, delete and other operations.
You can record the video and save it on SD Card when SD Card built in. Video can be saved on the Computer
at Local.
