© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| [email protected] | www.rgblink.com
31
the save”, then please reboot the camera to make new setting effect.
3.6.3 Video Configuration
1) Video encoding
Code stream:
Different video output mode setting,use different streams. (Main stream,secondary stream)
Compression Format:
Set the video compression format,save and reboot to take it effect (primary/secondary
stream default:H.264,H.265 optional)
Profile:
Profile Mode Setting (Default HP
，
BP
、
MP Optional)
Video Size:
Set video image resolution,save and reboot to take it effect (main stream default 1920 * 1080 or 1280
* 720 optional;default secondary stream 640 * 320,320 * 180,1280 * 720,1920 * 1080 optional )
Stream Rate control:
Set rate control mode,save and reboot to take it effect (Primary/secondary stream default
variable bit rate,fixed rate is for option).
Image Quality:
Set the image quality,image quality can be changed only when rate control is variable bit
rate,(main stream defaulted is better,secondary stream default is not good, there are best, better, good, bad,
worse, worst for options).
Rate (Kb/s):
Set the video bit rate (main stream default 4096Kb/s,64-12288Kb/s optional; secondary stream
default 1024Kb/s,64-10240Kb/s optional).
Frame rate (F/S)
: Set the video frame rate (primary/secondary stream default 25F/S,primary stream 5-60F/S
optional,secondary stream 5-30F/S optional ).
Key frame interval:
Set the key frame interval (primary/secondary stream default 75F,primary/stream 1-300F
optional. Secondary stream 1-150F optional).
Stream Name:
When streaming via rtsp or rtmp, user can modify stream name. Main Stream(live/av0), sub
stream(live/av1)
Click the "Save" button to display the "saved successfully" message,then settings take effect.
2) Stream Release
Switch:
To turn on/off the main/secondary stream.
Protocol:
primary / secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935,0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0,live / av1 optional).
User:
Set the user name.
Password:
Set the password.
Click on the "Save" button to display the "Save successful" message,then settings take effect.
Method of obtaining RTSP: rtsp: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary
stream)
3) RTP Broadcasting
Main/Sub Stream:
On/off
；
Protocol:
RTP or TS
Address:
Default 224.1.2.3. It can be edited.
Port:
Main Stream Default Port: 4000
，
Sub Stream Default Port: 4002
）
Visit:
Address comes up after setting. Eg; rtp://224.1.2.3:4000
；
udp://@224.1.2.3:4000
；
4) Video Parameters
A.Focus: Focus mode,focus range,focus sensitivity can be set.
Focus Mode:
set the focus mode (the default auto,manual optional)
Focus range:
set the focus range (the default middle,the upper and lower optional)
