RGB LT-3800-5A, Руководство пользователя

Страница: 7 / 10

LT -3800-5A LED RGB Controller Manual Page 7 of 10
2. Detailed key functions
Sign Button Description
ON /OFF
Turn on/off the controller
Any button can start the controller at off
status.
PAUSE
Press this button will rest at current color, it will
continue to change if press again.
Press this button in 3 seconds, the buzzer can
be on or off.
MODE+
MODE-
Press them to select next mode or back to
previous mode (pls refer to the
Ⅵ
item) , press
MODE+ or press MODE- over 3s to enter cycle
mode.
SPEED+
SPEED-
Press them to quicken or slower speed, press
SPEED+ or SPEED- over 3s, current speed is
restored to Default status.
BRT+
BRT-
Press them to increase or decrease brightness,
press any one over 3s, current brightness is
restored to Default status.
DIY modes
Press them over 3s, LED flickers twice, then
remember current change mode on this button,
it can save 4 modes, just press it once then
enter into pre-setup mode.
DIY modes
of remote
Press them over 3s, LED flickers twice, then
remember the current mode on this button, it
can save 8 modes, later can reach your
pre-setup mode by just pressing it once.
PLAY
Cycle play the 4 pre-setup modes in controller.