6
5)
Using the keys
↑
and
↓
set the appropriate temperature offset value within the range of ±9.9°C and confirm it with
the key
→
.
Of Y
yes
Of N
no
To
configure the display (content) synchronization
using a remote control, you should:
1)
Call the configuration menu pressing the
MENU
key.
2)
Select the
F11
function using the keys
↑
and
↓
and confirm it with the key
→
.
3)
Using the keys
↑
and
↓
select „
SC Y”
and confirm it with the key
→
.
4)
Using the keys
↑
and
↓
set the appropriate synchronization mode „
SC Cb”
(Slave - Content Basic)
,
„
SC Cf”
(Slave - Content
Full)
,
„
SC Sr”
(Master – Server Content) and confirm it with the key
→
.
NOTE!
The
only
result of the above configuration is setting / switching over to the selected operation mode. Full
configuration of display synchronization requires configuring through the webpage. For a Slave device (basic or full),
you should configure the IP address of the Master being the synchronization source.
To
view information about the signal strength or disconnection of the GPS module
using the remote control as follows:
1)
Call the configuration menu pressing the
MENU
key.
2)
Select the
„F12”
function using the
↑
and
↓
keys and confirm it with the
→
key.
GP Un
GPS unconnected
GP NO
GPS no signal
GP PS
GPS poor signal
GP GS
GPS good signal
To
configure the clock location, the time zone, taking into account the daylight saving
time, you should:
1)
Call the configuration menu by pressing the
MENU
key.
2)
Select the
F13
function using the
↑
and
↓
keys and confirm it with the
→
key
.
3)
Using the
↑
and
↓
keys, select the clock location and confirm it with the
→
key.
LO EU
location Europe
LO AU
location Australia
LO US
location the United States
LO CA
location Canada
LO IL
location Israel
4)
Using the
↑
and
↓
keys, activate/deactivate taking into account the daylight saving time and confirm it with the
→
key.
dst y
yes
dst n
no
5)
Using the
↑
and
↓
keys, activate/deactivate the time zone and confirm it with the
→
key.
G y
yes
G n
no
6)
Using the
↑
and
↓
keys, select a time zone and confirm it with the
→
key.
-12
UTC zone -12:00
…
…
14
UTC zone +14:00
7)
The clock will return to the main menu, to exit the main menu, press the
←
key.
NOTE!
While configuring regional settings, the user must be aware of the time zones in the available locations.
NOTE!
For the Polish official time, you should enter the UTC+1 (G 01) time zone and activate taking into account the daylight
saving time „
dst y
”
NOTE!
When you are setting the time zone, remember to maintain the conformity with the preset location. The illustration
below will help you to choose the appropriate time zone.
Содержание ZA series
Страница 7: ...7 ...
