RFNet APRT-2801 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 55

background image

Page 23 of 55

IP Address: This displays the IP of your WAN as given by the ADSL modem.
Network Mask: This displays the network mask of your WAN as given by the ADSL modem.
Gateway  Address:  This  displays  the  gateway  address  of  your  WAN  as  given  by  the  ADSL
modem.
DNS Server: This displays the IP address of the DNS server as given by the ADSL modem. You
can manually set the DNS server if your ISP provides you with the IP address of the DNS server.
Secondary  DNS:  This  displays  the  IP  address  of  the  secondary  DNS  server  as  given  by  the
ADSL modem. You can manually set the secondary DNS server if your ISP provides you with the
IP address of the secondary DNS server.
Username: Enter the username given by your ISP.
Password: Enter the password given by your ISP.
MTU: Maximum Transmission Unit indicates that packets larger than this size will be fragmented
before the transmission. Enter an MTU value only if required by your ISP. Otherwise, leave it as
the default setting.
Manual: You will only be connected or disconnect to the Internet when you click on the Connect
and Disconnect button.
Always  on:  The  Router  will  auto-connect  with  the  ISP  when  it  restarts  or  when  the  PPPoE
connection is dropped.
Connect  on  Demand:  Router  will  auto-connect  to  ISP  when  user  launches  any  program  that
require Internet connection on his PC.
Idle  Time  before  auto-disconnect: You can set the Router in such a way that it will disconnect
after a certain period of inactivity. The time can be set in this field.

Basic > MAC CLONE

The  default  WAN  MAC  address  is  set  to  the  WAN’s  physical  interface  MAC  address  on  the
Router.  You can use  the  MAC  Clone function to replace the  default MAC  address to that of the
Ethernet  Card  installed  by  your  ISP.  It  is  not  recommended  that  you  change  the  default  MAC
address unless required by your ISP.

Enable MAC Clone: Tick to enable MAC Clone function.
MAC Address: Enter the MAC address you wish to clone or use the default MAC by
clicking on the Use Default MAC button.
Your PC MAC Address: This field reflects the MAC address of your computer.

«
...
21
22
23
24
25
...
»

Содержание APRT-2801
























































Отзывы:

Нет отзывов

Похожие инструкции для APRT-2801

Бренд: Canon Страницы: 4

Бренд: D-Link Страницы: 3

Бренд: D-Link Страницы: 12

Бренд: Panasonic Страницы: 20

Бренд: Ubiquiti Страницы: 18

Бренд: United Security Products Страницы: 16

3CRWE91096A - Wireless LAN Building-to-Building...

Бренд: 3Com Страницы: 2

Бренд: Abocom Страницы: 37

Бренд: Baileigh Страницы: 20

Бренд: Alfa Network Страницы: 1

Бренд: Airlink101 Страницы: 15

Бренд: Bountiful Страницы: 58

Бренд: Arista Страницы: 4

WLTMS-110_384041

Бренд: Gemtek Systems Страницы: 14

Бренд: EDIFIER Страницы: 1

Бренд: EDIFIER Страницы: 7

Бренд: Edge-Core Страницы: 332

Бренд: D-Link Страницы: 162

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды