Warning!
The unit is intended to be permanently connected to supply mains by properly rated wiring in
accordance with applicable local and national codes (e.g. CEC, NEC etc).
Warning!
The chassis of the unit shell be reliably bonded to protective ground.
Warning!
The RFL 3200 UK-10 may use third party SFP Class 1 Laser Modules. These modules may be
purchased through RFL or third parties. The class 1 certification originates with the SFP
manufacturer, not RFL. Read the following safety information and any additional safety
information included with the modules.
Class 1 Laser Products supplied by RFL are not considered dangerous and comply with the
following standards:
US 21 CFR 1040.10 and 1040.11
IEC 60825-1: 2007
Laser light can potentially cause serious eye damage. The lasers used in the RFL 3200 UK-10
produce light that is invisible to the naked eye. It should be assumed that the laser is active at all
times and it is imperative that the technician never look into the end of the fiber or the aperture
with the naked eye or with optical instruments.
CAUTION
Any installation using an enclosed cabinet with a swing-out rack must be securely fastened to the
floor. This will prevent the cabinet from falling forward when the rack is moved outward.
CAUTION
If your RFL3200 UK-10 has Optical Fiber Heads always replace the protective covers when the
unit is not in use.
NOTICE
RFL products are not designed for safety critical direct control of nuclear reactors and should not
be used as such.
RFL3200 UK-10 User Guide
RFL Electronics Inc.
October 6, 2010
5
973.334.3100
