Rev 7.21
8
If your device is found, a folder named XPort will appear; expand it to expose the firmware version
and expand it one more time to expose its IP address. Navigate to the IP ADDRESS, select it. 3 tabs
will appear on the right. Device Details, Web Configuration, and Telnet Configuration; select Web
Configuration and click the green button labeled GO. A password window will pop up. Leave it blank
and click OK.
Select Serial Settings, change the baud rate to match that of the serial port (default 9600), check
enable packing, select 12msec idle gap time. Upon completion the next screen should look like that
below. Scroll down and click the OK button. While there is still a “Done!” label next to the OK button
select Connection on the left to change pages.
