The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
RefGuide_U-routerNGW_v1.01.docx
Page: 11(
57)
4.
The SIM card holder is located on the little LTE daughter board close to the 2G/4G SMA
antenna connector.
5.
Insert the SIM card with the connections facing towards the daughterboard into the SIM
card holder. Pay attention to the correct position. The SIM card has a small cut off corner
which is located on the bottom right corner in the picture below.
The SIM card should ‘click’ into place.
6.
Re-assemble the unit, taking the above steps in reverse order.
5.2
Connecting Power using the Power Adapter
Connect the supplied power adapter to the power port of the U-router NGW. The power port is
labeled: “
PWR
”. The plug the power adapter into a power outlet.
5.3
Connecting Power using the PoE Power Supply
Connect the PoE cable of a PoE switch, or the supplied PoE adapter, to the “
ETH
” port of the U-
router NGW.
