12
Installation
2x
5. For a battery assembly B22: fix the center plate with 8
self drilling screws at the front and back sides of the battery
assembly.
S
6. The joint S between the damper and the wall needs to
be filled along the whole width of the wall with a standard
concrete mortar.
BC
M
7. Support the body and block the damper blade in its closed
position to prevent deformation of the body during the drying
process of the sealing.
Check for openings in between the individual dampers.
Seal the openings with adhesive BCM.
Run a test on the mechanisms of the fire dampers.
TEST!
8. Check the functioning of the damper blades.
Maintenance
∎
No specific maintenance required.
∎
Schedule at least 2 visual checks each year.
∎
Remove dust and all other particles before use.
∎
Follow local maintenance regulations (i.e. BS9999 Annex V; NF S 61-933) and EN13306.
∎
Read the maintenance instructions on our website: https://www.rft.be/assets//PIM/DOCUMENTS/BROCHURE%20KITS/BRO_K139_
MAINTENANCE_C.pdf
∎
Use the damper at up to 95% humidity, non-condensing.
∎
The fire damper can be cleaned with a dry or slightly damp cloth. It is forbidden to use abrasive cleaners or mechanical cleaning
techniques (brush).
5
6
7
8
