RF-Star BM-ND04C Скачать руководство пользователя страница 7

Страница: 7 / 51

nRF52810

www.szrfstar.com

V1.3 - Sep., 2020

Shenzhen RF-star Technology Co., Ltd.

Page 6 of 50

2 Overview

2.1 Introduction

The Bluetooth LE modules which are mentioned in this document can work in bridge mode (transparent transmission

mode).

After the module starts to broadcast, smart phone with specific APP running will scan and pair with it. When connection

is successful, the smart phone can monitor and control the module through Bluetooth protocol.

In bridge mode

, user CPU can communicate with the mobile device bi-directionally through the serial ports of modules.

Users can also manage and control certain communication parameters through specific AT commands of serial ports.

The detailed meaning of the user data is defined by the upper applications. Mobile devices can write the module through

the APP. And the data written will be sent to the user CPU through serial ports. Then the module will transmit the data

packet from user CPU to the mobile devices automatically. Under the development in this mode, the user needs to

undertake the code design for master CPU and the APP for mobile devices.

In order to ensure the stability of the firmware, the module will start to work normally after 500 ms of power on.

2.2 Features

Easy to use, no need of any application experience of Bluetooth protocol stack.

Support BLE slave mode and Beacon mode.

Default connection interval of 7.5 ms, which makes quick connection and enhance the compatible stability of

Android and iOS phones.

UART design for user interface, full-duplex bi-directional communication, and support the minimum baud rate of

4800 bps and the maximum baud rate of 460800 bps.

Support software reset module by AT command.

Support acquire and modify the MAC address (to take effect after resetting) by AT command.

Support adjust the Bluetooth connection interval and control different transmit rates (dynamic power consumption

adjustment) by AT command.

Support adjust the transmit power, modify the broadcast interval, modify the serial port baud rate, modify the module

name, by AT commands, please check for details in

AT Command

Support modify Service UUID by AT command.

10.

AT commands can be sent through APP.

11.

High-speed transparent transmission rate, stable transmission at 30 KB/s (when there is no serial port transmission

Содержание BM-ND04C




















































Результаты поиска

Содержание BM-ND04C

Отзывы:

Бренды по названию

Популярные бренды

RF-Star BM-ND04C, Руководство пользователя

Результаты поиска

Содержание BM-ND04C

Отзывы:

Бренды по названию

Популярные бренды