RIoT-MINIHUB Quickstart Guide
Page: 4
QS-RIOT-MINIHUB-1
Stage
Description
1
Configure RIoT-MINIHUB to Login to your local Wi-Fi
2
Pair your Smart device with RIoT-MINIHUB
3
Pair an RF Sensor/Switch with RIoT-MINIHUB
4
Pair an
RF Sensor/Switch to your Smart device App
Setup Procedure: Before you Start
You need a Smartphone / Tablet or Smart device connected to your local Wi-Fi
You now need to complete the following Tasks
Download & Install the following Apps from the App Store:
Stage
Description
5
Configure an RF Sensor/Switch Transmitter
6
Direct Control Local RF Remote Control Relay Switching
7
Alerts! Setup Push notifications to your Smart device
Additional Optional User Settings
RIoT-MINIHUB Quickstart Guide
Page: 13
QS-RIOT-MINIHUB-1
Stage
6
Direct Control Local RF Receiver Relay Switching
This Feature commands the RIoT Sensor/Switch to
automatically send an RF Signal to local RF Receiver(s) when a
Trigger Level is reached.
Example of Direct Control:
If measuring the temperature in a Greenhouse when the Temperature rises to
the Upper trigger level, then Direct Control Signal sends an ON signal to the
RF Receiver, which operates its relay (changeover contact) output. This can be
used to open a window. When the temperature drops below the Lower Tem-
perature Trigger the OFF signal is sent thus closing the window.
Notes
On Alarm trigger activation, the RF Sensor/Switch Transmitter will send an RF
command to any “Paired” RF receiver which will then operate its relay
(changeover contact) outputs.
Hint:
The RIoT Sensor/Switch must be paired to the RF Receiver. To do this follow the
standard Pairing process for the RF Receiver unit (See RF Receiver Datasheet).
