RF SOLUTIONS ELITE-KIT, Руководство пользователя

Страница: 5 / 10

ELITE-KIT Remote Control System
The SQUIDBOARD is very simple to connect and use. Wire a switch to either one or both of
the inputs and close the contact to send a signal. As default the SQUIDBOARD is designed
for use with 2 way switches—to change the state of a receiver like a light switch.
1. Strip off plastic
Strip off the plastic from the outputs which will
be used. Approximately 10mm or more
depending on switch used.
2.
Position board to suit application
All of the legs can be bent and moved to help the compo-
nent fit into any switch, Once all wired-in outputs have been
connected, position any idle legs so the switch facial can fit
into it’s enclosure.
3.
Insert wires into the chosen screw terminals
Simply insert the wire into the terminal and hold in place
by screwing tight.
Connect the battery
The SQUIDBOARD comes with a connector for 2 x AAA but
can be run from any voltage between 4.5-12Vdc.
4.
5.
Fix the facia to the backbox
Place battery and SQUIDBOARD inside the
enclosure of the switch and screw closed.