RF Code Mantis II, Руководство пользователя

Страница: 7 / 28

© Copyright 2003-2005 RF Code, Inc. All rights reserved. UM-C2020-R05-20030422.
No copying of this material is allowed without prior written permission. Page 7 of 28.
7
USER MANUAL – Mantis™ II Reader
Tag Activity LED
• While Operating – The Tag Activity LED flashes intermittently,
indicating the Reader has read one or more Tags each time it flashes.
Because the Reader can decode Tags faster than the light can be
turned on and off, a single flash may indicate more than one Tag
being decoded.
• While in Standby Mode – The Tag Activity LED turns on and off at a
distinctive rate that indicates the Reader is in standby mode.
Rear View – Data Connections
Figure 2.2 – Mantis™ II Reader (rear view) showing connections for
Network/Ethernet (RJ-45), Power, and Serial/COM (RS-232).
Several connections are housed on the back of the Mantis™ II Reader .
• Ethernet – RJ-45 Ethernet jack. The Ethernet connection has a link-
state “LINK” LED and collision “COL” LED such as those found on
common Ethernet network connections. The LINK light stays solid
when there is no network activity and flashes when activity is present.
• Power – A plug allows for connection to both AC and DC power
sources. Power requirements are 12 to 28 VDC and 9 to 20 VAC.
• Serial – DB-9 RS-232 serial port.