0108RPVDGBEN
18
SECTION 10. GAS CONVERSION
10.1 This air heater is designed to operate on natural,
propane or butane gas and will be supplied as
ordered for the gas type specified. In the event it
is required to convert to a different gas type to
that which has been supplied, conversion of the
gas burner must be carried out.
10.2 A Reznor approved conversion kit to suit the
appropriate gas type must be used.
10.3 In addition to changing the burner injectors, and
adjusting the gas pressure, sealing a governor or
fitting a blanking plate it is necessary to fix over
stickers as supplied with the conversion kit of
parts.
10.4 After conversion re-commission appliance
according to section 6 of this document.
Figure. 13
BURNER AIR SHUTTER & SETTING DIMENSION for all GASES - GB & IE only
