0108RPVDGBEN
13
Fig. 8 SERVICE ACCESS KEYS
Legend figure 8
1
Remove gas entry cover plate
2
Undo cam fastener
3
Remove access panel
4
Remove 2 screws either side of flue terminal
5
Remove terminal and 2 screws behind
6
Remove cover panel by pushing
DOWN
Fig. 9 IGNITER ASSEMBLY
Fig. 10 REMOVAL OF COMBUSTION AIR FAN (VENTER) MOTOR FAN IMPELLER ASSEMBLY
CRITICAL DIMENSIONS
7.17
TO REMOVE COMBUSTION AIR FAN:
1.
Disconnect electrical connections to fan motor.
2.
Remove motor and venter wheel (3 screws).
3.
Withdraw motor/impeller assembly sideways.
4.
Clean venter housing.
5.
Check, clean or replace motor and/or venter
wheel.
6.
Replace in reversed order after checking critical
dimensions (fig. 10)
