Reznor Kronos GA11, Руководство по установке

Страница: 4 / 12

17040952—ENG
4/12
MAXIMUM POWER ‐ By pushing the  button
again you
enter the
menu for
setting
maximum
power.
Here it is
possible to
limit the power level required for heating the
environment.
More details are given in the section ‘Thermo‐
regulation’.
PARAMETERS MENU ‐ Pushing the button
 again, enters the submenu PARAMETERS
MENU .
The
parameters
menu
allows you
to see the
parameters
of the air heaters and permits you to manage
advanced functions.
HEATING MODE ‐ If you press  , the control
panel of the
heating
system
appears
The first row displays the icon illustrating the
status of thermoregulation and the heaters and the
number of heaters or slaves connected.
The second row gives additional information about
the status of heaters or anomalies. The third line, if
available, shows the value of outdoor temperature
or errors related to thermoregulation environment.
This menu has a fixed frame. The options
previously seen remain displayed for 20 seconds,
then the display returns to the main screen. In this
option however if the user does not push ESC or
the

buttons, the chronothermostat continues
to show the control panel with the relevant
information.
AUTOMATIC
MODE ‐ By
pressing the
button

again, you
return to the
first option.
In case the automatic mode is already active, it
does noet matter whether you push NO or OK.
SETTING MENU
 Programming
This submenu
allows you to
manage
temperature
control
environment,
weekly program, time setting and language choice.
Selecting the option ‘Programming’ you enter the
weekly program
submenu.
Choosing the
option
‘Temperature’
you enter in the
menu of the 4
temperature levels T0, T1, T2 & T3.
Push the buttons

and

to select the temperature
level – to vary the temperature value use the
b and ‐.
The right side of the screen shows the relative
position of the current temperature setpoint with
respect to minimum (5°C) and maximum (30°C)
values.
The highest temperature is associated with T3 and
the lowest temperature with T0, the chrono‐
thermostat meets the following constraint :
T0

T1

T2

T3 and automatically resizes the
temperatures.
Choosing the
option ‘Day
program’ it
takes you to
following
screen :
At the top of the screen you select the day and at
the bottom of the screen the day program is
displayed. Pressing the + and ‐ buttons you can
select the day.
For example,
suppose you
want to
program the
day "Monday",
pressing OK
button you
enter the
scheduling of time slots.
The time slots are programmed in three steps:
initial time, temperature and final time.