17040952—ENG
3/12
MANUAL
MODE
‐ The buttons on the right marked
with + and ‐, allow to vary the temperatures
required for the automatic program (T0, T1, T2,
T3). In manual mode they allow to vary the set
point room temperature. By pushing the buttons
on the left, marked with arrows, you can browse
the pages of first level menu.
When pushing the button
following screen
appears.
Pushing the b and –allows to vary the
temperature. Activate the manual mode by pushing
the OK button.
SUMMER
MODE
‐ Pushing the
button again
activates
the
summer
mode.
The management of the chronothermostat by the
user is mucht simplified. The functions related to
the heater and the functions related to the
thermoregulatin are not distinct.
If you select the summer mode, you can activate
summer ventilation by the function key (Vent) –
when
activated,
a key
mark
become
(V.OFF)
and it is
possible
to stop this function by using the same key.
Constant ventilation TSP P06
eg
:
T1=20°C,
P06=20°C,To=16°C
during
T1
period
T1=P06
cont.
vent
during
To
period
To
P06
no
cont.
vent
STANDBY
MODE
‐ Pushing the
button again, the
standby
menu
appears
The standby mode allows you to turn off the
system (temperature control environment &
ventilation are disabled).
The first level menu is circular meaning that all
screens are accessible by pushing the
OVERTIME
MODE
‐ Continuing and pushing the
button
▼
again, you can choose to activate the
operating mode "Overtime".
In operating
mode
“Overtime”,
the room
thermoregul
ation
follows a
temperature
for a duration set by the user.
The duration of one step is 15 minutes, the
maximum period is 240 minutes.
Pushing the +/‐ buttons you can set the
temperature and then after pushing OK button you
are asked to set the time as shown below.
Concluded the time duration of the operating mode
"Overtime" the chronothermostat is positioned in
the operating
mode
"Automatic".
The
operating
mode
"Overtime" is
useful when you want to stop the operation mode
"Automatic"
forcing
function
thermostatic
(overtime) for a specified period.
The first level menu is circular, all the screens
described above are accessible by pushing the
reverse button
▲
.
SETTING
MENU
‐ Pushing again button
activates the
submenu
SETTING
MENU
.
This menu sets the calendar, the mode of thermo‐
regulation
and a
weekly
schedule
(more
details are
given in a
separate paragraph below).
