nail
nail
Step 9
Assemble 12' Door Wall
1.
Gather the material listed below to assemble the door wall.
6
Pre-cut Wall Studs
4
2x4-6' Boards
1
Door Header from
Step 8
1
2x4 Block
2.
Install (4) four pre-cut wall
studs between the 2x4-6' boards
where shown. Temporarily
secure the bottom 2x4-6' boards
together with a 2x4 block.
3.
Install the door header at the
top of the door opening.
4.
Cut and install (2) two pre-cut
wall studs under door header.
99" Rough Door Opening
2x10 Door Header
2x4+6'
Cut pre-cut studs and install
under door header
on both sides
22-1/2"
22-1/2"
Screw 2x4
block with 3"
wood screws.
2x4+6'
2x4+6'
7.
Install a siding panel, leftover from
Step 3
, above
the door opening.
8.
Install another 4x8 siding panel on the right side
of the wall panel. Cut and remove the siding that
extends into the door opening.
5.
If the pre-cut wall studs supplied with our kit measure 92-5/8", install a 1x4-8' board under
the door header to shorten the door opening.
6.
Install a 4x8 siding panel on the left side of the wall panel. Before you install the siding,
cut and remove the siding that extends into the door opening.
Cut Siding Flush With Door Opening
1x4-8' Board
