Tongue Edge
LAP Edge
Tool List
Hammer & Phillips Screwdriver
Framing Square & Level
Hand or Circular Saw
Always wear safety glasses when cutting or nailing!
The siding is made in 4x8 sheets with grooves
cut into the face, the long edge is beveled so
that the siding overlays where they butt.
To identify which edge we want you to use, we
will refer to the edge as either the 'LAP' Edge
or the Tongue Edge. Nail siding with 8d galv.
nails, spaced 12" apart.
Power Drill/Screwdriver
Measuring Tape
2 - 8' Step Ladders
I
MPORTANT
I
NFORMATION
A
BOUT
Y
OUR
S
HED
K
IT
This manual will show the assembly for the 10' x 16' Woodville building kit. If you received
duplicate books, use the one with the latest revision date.
The foundation size should measure 10'-0" wide by 15'-9". Do Not make the foundation
larger than the building size. The siding should project beyond the foundation for water to
expel properly from the sidewalls.
The material that is included in our kit is listed on the back page. The optional floor package,
if ordered, will be supplied by a local lumber supplier. Our kit does not include the shingles,
the quantity needed is listed on Step 14.
Unpack the material from the pallet and unscrew the top 2x4s. They will be used for wall
plates in Step 7 and wall bracing. The bit for the screws is packed in the hardware bag.
Our 'Deluxe Woodville' includes pre-built barn doors, pre-cut siding and roof sheathing for
EZ assembly.
Stacking the boards, according to size, will make them easier to find when needed. Some
boards have colored ends. All the 72" long 2x4s have black ends, stack these boards together.
The siding is primed. You will need to apply a finish coat using latex acrylic paint.
Paint the
bottom edges of the siding around the perimeter of the building. Keep dirt, grass, mulch,
snow and similar substances away from the lower part of the siding.
If you have any questions about assembling the kit, call 800-245-1577. If you are calling
after normal business hours, call 724-866-HELP (4357) or email to [email protected].
Before you begin construction, be sure to study this assembly manual. Also, obtain a building
permit and check all pertinent building code regulations.
Thank you for your purchase.
Bill & Linda Rinella, owners
