------------------------
Operations
Front Panel
1. On-line LED & Selected LED
When the LED turns green, the connected computer is powered-on. When
a computer is selected, its corresponding red LED illuminates.
2. Pushbuttons
Each computer has a button associated with it on the front panel for
selection.
Auto Scan
Auto Scan
automatically scan through computers one by one in a fixed interval
(see
Scan Time
below).
To activate
Auto Scan
, press down front panel push buttons "3" and "4"
simultaneously. The port LED flashes during
Auto Scan
.
Auto Scan
is
effective for powered-on computers only. To exit the
Auto Scan
mode, just tap
any one of the pushbuttons.
Note: keyboard and mouse are not operable during Auto Scan.
Scan Time
It sets the scan interval for
Auto Scan
. The Scan Time options are 3, 8, 15
and 30 seconds.
To change the
Scan Time
interval, press both front panel buttons "1" and "2"
simultaneously. The DAAG-114 / DADG-124 beep 1, 2, 3 or 4 times for
Scan
Time
of 3, 8, 15 or 30 seconds respectively.
Note: Scan Time is automatically set to the default of 3 seconds when the units
loses power.
6
Содержание AcroGear Series
Страница 1: ......
